Atec Agilent-E8361A - Manual (Page 24)

E8361A
Corrected system performance with 1.85 mm connectors
continued
Description Specification (dB)
30 to 40 GHz 40 to 50 GHz 50 to 60 GHz 60 to 67 GHz
Directivity 1 8
Source match 0 7
Load match 9 6
Reflection tracking ±0.060 (+0.0/°C) ±0.070 (+0.0/°C) ±0.080 (+0.0/°C) ±0.090 (+0.0/°C)
Transmission tracking ±0.08 (+0.0/°C) ±0.097 (+0.0/°C) ±0.11 (+0.0/°C) ±0.1 (+0.0/°C)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
E861A fully optioned 1 full two port cal using N69A
0 to 0 GHz
0 to 50 GHz
50 to 60 GHz
60 to 67 GHz
S11 = S = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
B)
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -0 -0 -0 -10 0 10
Transmission coefficient (dB)
E861A fully optioned 1 full two port cal using N69A
0 to 0 GHz
0 to 50 GHz
50 to 60 GHz
60 to 67 GHz
S11 = S = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
eg
re
es
)
Magnitude
0
0.01
0.0
0.0
0.0
0.05
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
E861A fully optioned 1 with N69A
0 to 0 GHz
0 to 50 GHz
50 to 60 GHz
60 to 67 GHz
S1 = S1 = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(l
in
ea
r)
Phase
0
6
8
10
0 0. 0. 0.6 0.8 1
Reflection coefficient (linear)
E861A fully optioned 1 with N69A
0 to 0 GHz
0 to 50 GHz
50 to 60 GHz
60 to 67 GHz
S1 = S1 = 0
Source power = -0 dBm
Un
ce
rta
in
ty
(d
eg
)
Fully optioned (E8361A with options 014/UNL/080/081/016)
Applies to E8361A PNA Series analyzer, N4694A
(1.85 mm) ECal electronic calibration module, 85133F
flexible test port cable set, and a full two-port calibration.
(Specifications apply over environmental temperature
of 23 °C ±3 °C, with less than 1 °C deviation from
calibration temperature.)
1. Configurable Test Set, Extended Power Range and Bias-Tees, Receiver Attenuators, Frequency Offset
Mode, and Reference Channel Transfer Switch (Option 01, UNL, 016, 080 and 081).