Atec Agilent-E8361A - Manual (Page 35)

5
E8361A
Uncorrected system performance 1
continued
Description Specification Supplemental information
Reflection tracking Typical:
10 to 5 MHz ±1.5 dB
5 MHz to 0 GHz ±1.5 dB
0 to 0 GHz ±.0 dB
0 to 50 GHz ±.0 dB
50 to 67 GHz ±.0 dB
67 to 70 GHz ±.5 dB
Transmission tracking
3
Typical:
10 to 5 MHz ±1.5 dB
5 MHz to 0 GHz ±1.5 dB
0 to 0 GHz ±.0 dB
0 to 50 GHz ±.0 dB
50 to 67 GHz ±.0 dB
67 to 70 GHz ±.5 dB
Crosstalk 4 - standard
10 to 5 MHz 6 dB
5 to 500 MHz 87 dB
500 MHz to GHz 110 dB
to 10 GHz 105 dB
10 to GHz 111 dB
to 0 GHz 106 dB
0 to 0 GHz 10 dB
0 to 5 GHz 98 dB
5 to 50 GHz 100 dB
50 to 60 GHz 97 dB
60 to 67 GHz 9 dB
67 to 70 GHz 9 dB
Crosstalk 4 - Option 014 Typical (for Option 080 enabled 5 )
10 to 5 MHz 6 dB 6 dB
5 to 500 MHz 87 dB 87 dB
500 MHZ to GHz 110 dB 110 dB
to 10 GHz 105 dB 105 dB
10 to GHz 111 dB 111 dB
to 0 GHz 10 dB 10 dB
0 to 0 GHz 10 dB 10 dB
0 to 5 GHz 96 dB 96 dB
5 to 50 GHz 98 dB 98 dB
50 to 60 GHz 95 dB 95 dB
60 to 67 GHz 90 dB 90 dB
67 to 70 GHz 90 dB 90 dB
Crosstalk - Option 014 and UNL Typical (for Option UNL and
Option 01 with 080 enabled 5)
10 to 5 MHz 6 dB 6 dB
5 to 500 MHz 87 dB 87 dB
500 MHz to GHz 110 dB 110 dB
to 10 GHz 10 dB 10 dB
10 to GHz 108 dB 108 dB
to 0 GHz 101 dB 101 dB
0 to 0 GHz 99 dB 99 dB
0 to 5 GHz 9 dB 9 dB
5 to 50 GHz 9 dB 9 dB
50 to 60 GHz 91 dB 91 dB
60 to 67 GHz 8 dB 8 dB
67 to 70 GHz 8 dB 8 dB
1. Specifications apply over environment temperature of °C ± °C, with less
than 1 °C deviation from the calibration temperature.
. Typical performance.
. Transmission tracking performance noted here is normalized to the insertion loss
characteristics of the cable used, so that the indicated performance is independent
of cable used.
. Measurement conditions: Normalized to a thru, measured with two shorts,
10-Hz IF bandwidth, averaging factor of 16, alternate mode, source power set to
the lesser of the maximum power out or the maximum receiver power.
5. 0 Hz offset.