Atec Agilent-E8361A - Manual (Page 61)

Ordering guide for PNA series
Network analyzers
Options
To add options to a product, order the corresponding item number.
Description For E8362B For E8363B For E8364B For E8361A 2 Additional
item number item number item number item number information
Test set
Option 01 • Configurable test set E86B-01 E86B-01 E86B-01 E861A-01
Power configuration
Option UNL • Extended power range and bias-tees E86B-UNL E86B-UNL E86B-UNL E861A-UNL E861A only,
requires 01
Option 016 • Add receiver attenuators E86A-016 E86A-016 E86A-016 E861A-016 E861A only,
requires 01
and UNL
CPU RAM
Option 0 • Extended memory E86A-0 E86A-0 E86A-0 E861A-0
Non-linear measurements
Option 080 • Frequency offset E86A-080 E86A-080 E86A-080 E861A-080 Requires 01
Option 081 • Reference receiver switch E86A-081 E86A-081 E86A-081 E861A-081 Requires 01, 080
Option 08 • Frequency-converter E86A-08 E86A-08 E86A-08 E861A-08 Requires 01, 080,
measurement application and 081(E861A
only requires 01,
080) includes GPIB
to USB interface
(857A)
Option H11 • IF access (for antenna and E86B-H11 E86B-H11 E86B-H11 E861A-H11 Requires 01, 080,
pulsed-RF measurements) 081, and UNL
Option H08 • Pulsed-RF measurement capability E86B-H08 E86B-H08 E86B-H08 E861A-H08
Measurement features
Option 010 • Time-domain capability E86A-010 E86A-010 E86A-010 E861A-010
Option 550 • -port measurement application E86B-550 E86B-550 E86B-550 E861A-550
Accessories
Option 1CM • Rack mount kit without handles E86A-1CM E86A-1CM E86A-1CM E861A-1CM
Option 1CP • Rack mount kit with handles E86A-1CP E86A-1CP E86A-1CP E861A-1CP
N688A • USB CD R/W drive N688A N688A N688A N688A
N689A • USB Hub N689A N689A N689A N689A
Calibration documentation
Option 1A7 • ISO 1705 compliant calibration E86B-1A7 E86B-1A7 E86B-1A7 Available soon
Option UK6 • Commercial calibration certificate E86A-UK6 E86A-UK6 E86A-UK6 E861A-UK6
with test data
Option A6J • ANSI Z50 compliant calibration E86B-A6J E86B-A6J E86B-A6J E861A-A6J
Note: Item numbers may not correspond to product model number. For example, to order the time-domain option on the E86B,
the correct item number to order is E86A-010.
Warranty and service
One and three year warranty and service plans are available at the time of instrument purchase. The N550A microwave 110 GHz sys-
tem carries a full one-year on-site warranty (where available).
Calibration
Three year calibration plans are available at time of instrument purchase.
1. Not all models are available in all countries.
. E861AH11 enables E861A to cover 10 MHz to 110 GHz frequency range.
. External test set must be connected.
This guide is intended to assist you in the ordering pro-
cess. For detailed ordering information, refer to the PNA
Series Microwave Network Analyzer Configuration
Guide
(literature number 5988-7989EN).
PNA Series microwave network analyzers 1
E86B 10 MHz to 0 GHz
E86B 10 MHz to 0 GHz
E86B 10 MHz to 50 GHz
E861A 10 MHz to 67 GHz
61