Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 56)

Icon Function
Move up one level in the menu tree.
Press to leave the EDIT mode without saving the changes made to the selected menu
item.
Escape
Scroll up in a branch of the menu tree.
Increase a parameter (or value) while in the EDIT mode.
Up
Scroll down in a branch of the menu tree.
Decrease a parameter (or value) while in the EDIT mode.
Down
Displays the next lower level in the menu tree.
In the EDIT mode, ENTER accepts the new value into memory.
Pressing ENTER for two seconds or longer initiates Display Test mode. Display Test mode
switches all LED and LCD pixels (dots) on for several seconds. ENTER
+
Self-test
The XM2 power supply can manually be placed in a self test mode by pressing DOWN
and RETURN together:
Press DOWN and ENTER simultaneously. A self test will be initiated and run between
5-180 minutes (set in the setup menu).
To cancel a self test in progress, simultaneously press DOWN and ENTER.
4.2 Using the Smart Display
All operational functions, system testing, setup menus and alarms are available via the
illuminated display panel on the front of the CableUPS. Display functions are accessible by
pressing any of the four keys: ESCAPE, UP, DOWN and ENTER.
Descriptions of the key functions areas follows:
Fig. 4-2, Smart Display Navigation
OPERATION NORMAL
OUTPUT VOLTAGE 90V
Enter
Up Down
Escape
56 017-805-B0-010 Rev. K2
Icon Function
Move up one level in the menu tree.
Leave the EDIT mode without saving the changes made to the selected menu item.
Escape
Scroll up in a branch of the menu tree.
Increase a parameter (or value) while in the EDIT mode.
Up
Scroll down in a branch of the menu tree.
Decrease a parameter (or value) while in the EDIT mode.
Down
Displays the next lower level in the menu tree.
In the EDIT mode, ENTER accepts the new value into memory.
Pressing ENTER for two seconds or longer initiates Display Test mode. Display Test mode
switches all LED and LCD pixels (dots) on for several seconds. ENTER
+
Self-test
Press DOWN and ENTER simultaneously to manually enter self test mode. A self test will
be initiated and run between 5-180 minutes (set in the setup menu).
To cancel a self test in progress, simultaneously press DOWN and ENTER.
+
The operator can view the Configuration screen by pressing UP and ENTER together.