Alpha Technologies XM2, XM2-HV, XM2-HP - Manual (Page 52)

3.3.1 Output Voltage Switch (SW1) Settings, continued
Reconfiguration is a two-step process done while the power supply is switched OFF.
Adjust the output tap connector, as well as the output voltage switch (SW1), and
cycle the unit ON for the changes to be effective.
Table 3-3, Output Voltage switch settings for XM2-918HP, XM2-924HP
52 017-805-B0-010 Rev. K2
Legend Power Supply Output tap connector settings
63Vac 75Vac 87/89Vac
Model Output Voltage Switch Setting
XM2-918HP
XM2-924HP
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON OFF 63 Vac
75 Vac
87/89 Vac
63 Vac
75 Vac
87/89 Vac
63 Vac
75 Vac
87/89 Vac
ON