Alpha Technologies AMPS80 HP - Manual (Page 89)

87 Doc. #: 026-069-B0 Rev F
8.3 Alarm Codes
All alarm codes are listed in Table K. The following alarm codes are included here as well to provide more
information.
8.3.1 No Ethernet Communication
For a direct connection to the CXCR, verify that you are using a cross over cable, that your wireless connec-
tion is turned off, and that your local area network connection is set up as shown below.
Reset the CXCR by using the LCD touch screen as shown below:
To reset the T2S, remove it from the system, then hook it back up.
252W
2%
Press the “reset now” pop up when it appears.
Press Press Reset