Franklin Fueling Systems TS-LS300 AutoLearn Pressure-Based Electronic Line Leak Detector System Users Guide - Manual (Page 51)

Date Time of
Day
Line # Precision test
Passed?* Y or N
Alarm
Indications**
Push Test / Reset***
Monthly Annual
Form to record monthly LS300 status
If the LS300 is not connected to a printer through a TS-1001 / TS-2001
Page A6 Copy this page as needed
A APPENDIX A
LS300 User’s Guide
* Monthly (.2 GPH) test passed indicated by single TEST lamp FLASH.
Annual (.1 GPH) test passed indicated by double TEST lamp FLASH.
** Flashing ALARM lamp may be indication of system problem. Note lamp indicators and refer to page 6-5 for more
information
*** After test results are recorded, press TEST/RESET button. Past test passed lamp indications will be cleared. Record
results every two weeks.
NOTES:
Test result recording should not take place during a line leak test. See page 6-5 for lamp indications signaling a Gross, •
Monthly or Annual test
Test lamp will BLINK if doing a precision test ▫
Test lamp will REMAIN SOLID if doing a 3 GPH test ▫
BLINK-lamp cycles equal time on and off •
FLASH-lamp cycles 4 seconds off and brief on •
Refer to page 6-5 for complete lamp indicator information ▫
A steady HI lamp indication signals that dispensing is occurring. Do not record line test results while dispensing. •