Franklin Fueling Systems TS-LS300 AutoLearn Pressure-Based Electronic Line Leak Detector System Users Guide - Manual (Page 4)

PREFACE Page P-1 P
LS300 User’s Guide
P Preface
— Important – Read
Read and follow the entire instructions in this manual before installing or working on this equipment.
Certified Installer/Service Person: Only an INCON certified installer or service person is allowed
to access both the user interface kepad and areas internal to the TS-LS300 console.
Station Owner/Operator: The station owner or operator of the TS-LS300 console is only allowed to
access the user interface keypad. Access to areas internal to the console is strictly prohibited.
Graphic Symbol Conventions
Important information, tips, and hints are highlighted by the note graphic.
CAUTION messages are highlighted by the CAUTION graphic and contain instructions that should
be followed to avoid faulty equipment operation, or environmental hazards, or personnel injury!
WARNING messages are highlighted by the WARNING graphic and contain instructions that
must be followed to avoid faulty equipment operation or explosion. If ignored, severe injury or death
may result!
DANGER messages are highlighted by the DANGER graphic and contain instructions that must
be followed to avoid an explosion or fire hazard. If ignored, severe injury or death will result!
ELECTRICAL DANGER messages are highlighted by the ELECTRICAL DANGER graphic and
contain instructions that must be followed to avoid an electrical shock. If ignored, severe injury or
death may result and even severe damage to electronic equipment.
NOTE
NOTE
Earth Ground Terminal
Ground Terminal
Alarm/Failed Test
Testing/Passed Test
Pressure Low/Pump OFF
Pressure High/Pump ON
Horn/Audible Alarm
Test/Reset
Single Phase Alternating
Current
A
T
or H