Extron Electronics MTPX Series User Guide - Manual (Page 89)

4-9 MTPX Twisted Pair Matrix Switchers • Programmer’s Guide
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Audio input gain and attenuation
N The set gain (G) and set attenuation (g) commands are case sensitive.
Set input audio gain to +dB
value X#
*
X1!
G In
X#
•Aud
X1@]
Example: 1*2G In01•Aud+02
] Set input 1 audio gain to
+2 dB.
Set input audio attenuation
to -dB value X# * X1# g In X# •Aud X1@]
Increment gain X#
+G In
X#
•Aud
X1@] Increase gain by 1 dB.
Example: 5+G In05•Aud+03
] Increase audio input 5 level
from +2 dB to +3 dB.
Decrement gain X#
-G In
X#
•Aud
X1@] Decrease gain by 1 dB.
Example: 7-G In07•Aud-09
] Decrease audio input 7 level
from -8 dB to -9 dB.
Read input gain X#
G
X1@]
Audio or RS-232 mute commands
Audio or RS-232 mute X@
*1Z Amt
X@
*1
]
Mute output
X@
audio or
RS-232 (audio off).
Audio or RS-232 unmute X@ *0Z Amt X@ *0 ] Unmute output X@ audio or
RS-232 (audio on).
Read audio or RS-232 mute X@ Z X^] 1 = mute on, 0 = mute off.
Global audio or RS-232
mute 1*Z Amt1
] Mute all audio or RS-232
outputs.
Global audio or RS-232
unmute 0*Z Amt0
] Unmute all audio or RS-232
outputs.
Names
Write global preset name EX1$,X1%
NG
}
Nmg
X1$,X1%]
Example: E 1,Security 1NG }
Nmg01 , Security 1
] Name global preset 1
“Security 1”.
Read global preset name EX1$
NG
} X1%]
Example: E
2NG
}
Security 2
]
N • If a preset is unassigned, the
X1%
displays [unassigned].
• If a global preset is saved, but not yet named, the default name is Preset
X1$
.
Write input name EX#,X1%
NI
}
Nmi
X#,X1%]
Example: E 1 , Podium camNI } Nmi01 , Podium cam ] Name input 1
“Podium cam”.
Read input name EX#
NI
} X1%]
Write output name EX#,X1%
NO
}
Nmo
X#,X1%}
Example: E 1,Main PJ1NO } Nmo01,Main PJ1 ] Name output 1 “Main PJ1”.
Read output name EX#
NO
} X1%]
N
X@
= Output number 01 – 32
X#
= Input number 01 – (maximum number of inputs for your model)
X^
= Mute 0 = off 1 = on
X1!
= Audio gain 0 – 24 (1 dB/step)
X1@
= Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X1#
= Audio attenuation 1 – 18 (1 dB/step)
X1$
= Global preset # 0 - 32, 10 maximum (0 = current configuration)
X1%
= Name 12 characters maximum