beautypg.com

Preliminar y – Extron Electronics MTPX Series User Guide User Manual

Page 41

background image

3-15

MTPX Twisted Pair Matrix Switchers • Operation

PRELIMINAR

Y

Example 3: Removing a tie from a set of video and audio ties

In the following example, an existing audio tie is removed from the current

configuration. The steps show the front panel indications that result from your

action.

N

This example assumes that you have performed example 1 and example 2.

1

.

Press and release the Esc button (figure 3-16).

ENTER PRESET VIEW

ESC

CONTROL

Press the Esc button to clear all selections.

The LED
blinks once.

Figure 3-16 — Clear all selections

2

.

To select audio only for the tie, if necessary, press and release the Video button

and/or Audio button (figure 3-17).

VIDEO AUDIO

I/O

Press the Video button to
toggle on and off.

The LED is unlit when
deselected.

Press the Audio button
to toggle on and off.

The LED lights when
selected.

Figure 3-17 — Select audio only

3

.

Press and release the Input 5 button (figure 3-18).

2

3

4

5

6

INPUTS

7

1

2

3

4

5

OUTPUTS

6

7

8

Press and release the Input 5 button.
The LED lights.

The Output 3, Output 4, and Output 8 LEDs light to
indicate the audio ties created in example 1.

The output 1 LED does not light to indicate the tie
created in example 2 because that tie is video only.

Figure 3-18 — Select an input