Extron Electronics MTPX Series User Guide - Manual (Page 51)

3-25 MTPX Twisted Pair Matrix Switchers • Operation
PRELIMINAR
Y
3 . Press and release the Output 1 button (figure 3-40).
ENTER PRESET VIEW
CONTROL 1 2 3 4
1 2 3 4
The Preset LED remains lit.
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
Preset 17 Preset 18 Preset 20 Preset 19
The Enter LED blinks to indicate
the need to recall the preset.
This example shows the action
taken on an MTPX 1616. NOTE
Figure 3-40 — Select the preset
4 . Press and release the Enter button (figure 3-41). The configuration stored in
memory location 17 is now the current configuration and can be viewed in the
View-only mode (see example 4 on page 3-17).
ENTER PRESET VIEW ESC
CONTROL
The Enter and Preset LEDs
return to the unlit state.
Press the Enter button to
recall the preset.
All input LEDs
return to the
unlit state.
Figure 3-41 — Press the Enter button