Extron Electronics JMP 9600 User Guide - Manual (Page 99)

High Frame Rate
The high frame rate mode supports resolutions of 1920x1080 and 2048x1080 at 48, 50,
and 60Hz by using the dual HD-SDI connection mode. The media player must be set for
2-channel-locked mode and the content must be progressive frame only with interlaced
transport format, compatible with SMPTE 372-2009. The high frame rate content requires a
pair of DCPs; one containing the odd lines for each frame and the other containing the even
lines. Each DCP must be loaded on the appropriate channel of the player and both channels
must be loaded before the player allows playback. Loading a different file format or frame
rate clears the clip loaded on the other channel.
The Extron JPEG 2000 Encoder software (see “ Encoding Guidelines ”) automatically
generates the file format required for high frame rate operation when you select the
corresponding resolution and frame rate.
The high frame rate mode requires that the connected display support the SMPTE
372M dual-link HD-SDI interlaced transport mode. Several cinema projectors support
this mode with they are fitted with the appropriate dual-link HD-SDI input board. Please
confirm compatibility with the specialized equipment manufacturer. As an alternative,
an AJA Video Systems
®
Hi5 3G 3G/Dual-link/HD/SD-SDI To HDMI 1.3a Video and Audio
Converter can convert th a single HDMI connection.
NOTE: The Extron USP 507 supports only single-link HDSDI and the output frame rates
are limited to 50 Hz and 60 Hz (48 Hz is not supported).
Using Digital Inputs and Relays
WARNING : 12 VDC is always present on the inputs and relays Power port when the
media player is powered on. Ensure that no conductive material comes into
contact with these terminals.
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
1-2 3-4 5-6 7-8
DIGITAL VIDEO OUTPUTS DIGITAL
AUDIO OUT 2 1
DVI-I-1 DVI-I-2
HDSDI
JMP 9600
9-10 11-12 13-14 15-16
1 LAN 2 REMOTE 1
GENLOCK
LOCK LTC
IN
OUT OUT
IN
REMOTE 2
NC C NC NC NO NC C C C NO NO NO
DIGITAL INPUTS RELAY OUTPUTS 1 2 3 4 + - + - + - + - 12V POWER R1 R3 R4 R2
NC C NC NC NO NC C C C NO NO NO
DIGITAL INPUTS RELAY OUTPUTS
1 2 3 4 + - + - + - + - 12V
POWER R1 R3 R4 R2
Figure 75. Rear View of the Inputs and Relays Ports
The inputs and relays ports offers digital inputs and relay outputs that can be controlled via
third party show-control software. The inputs and relays ports feature:
• Four optically-Isolated digital inputs that can be configured to provide triggers to either
an external show-control system, which can issue commands to the JMP 9600
• Four digital outputs, each driving low current changeover relays that can switch up to
1 A at 24 VDC.
• 12 VDC to power the I/O switch function
JMP 9600 Media Player • Detailed System Interaction 93