Loading and updating firmware – Extron Electronics JMP 9600 User Guide User Manual
Page 86
Loading and Updating firmware
NOTE: The media player must run firmware version 2.06.07 or newer to properly
update to even newer versions. If you have version 2.06.06 or older, you must
update to 2.06.07 before updating to any later version. See “
“ in
the “Operation” section to determine your firmware version.
Acquire firmware upgrades and upload them to the media player as follows:
1.
Visit the Extron website,
www.extron.com
, click the
Download
tab, and then click the
Firmware
link (see
a
on figure 64).
3
2
3
1
1
NOTE: The file name, part number,
version, release date, and size
shown are sample values only.
Figure 64.
Location of Firmware Upgrade Files
2.
Select the appropriate firmware file (JMP 9600) to download and click
Download
(
b
).
3.
Enter the requested personal information and then click
Download
to copy the firmware
to your computer (
c
).
4.
Click
Run
on the next two screens (see
d
on
on the next page). The
PC downloads the firmware update from the Extron website and starts the Extron
Installation Program to extract the firmware file.
5.
Click
Next
(
e
on figure 65). The program extracts the firmware files and places them in
a folder identified in the InstallShield Wizard window.
NOTE: Note the folder to which the firmware file is saved.
6.
Click
Finish
to exit the program (
f
on figure 65).
JMP 9600 Media Player • Detailed System Interaction
80