Extron Electronics JMP 9600 User Guide - Manual (Page 42)

Play a Presentation
Play a presentation as follows:
1. Rotate the encoder to highlight the Ch. 1 Status selection or Ch. 2. Status selection
(depending on which channel you want to output the video).
2. Press the Enter button. The selected Channel Status menu opens.
3. Select and load a playlist as described in “ Playlist and Clip fields .”
The Play/Pause ( ) Button lights.
NOTE: If you load a new clip with a different resolution and frame rate than the
currently loaded clip, it can take up to 4 seconds before it is ready to play.
4. Press the Play/Pause ( ) Button to start playing the file. The LCD screen displays a
progress-bar as the clip runs. The video output appears on the connected display system.
NOTE: If you want the JMP 9600 LCD to fully display the video that is playing
(rather than a blend of the video and the control display), rotate the
encoder knob to highlight the Video Mode icon (
) and press the
Enter button.
Press the Previous button to return to the Channel Status menu or the
blended display.
JMP 9600 Media Player • Operation 36