Extron Electronics JMP 9600 User Guide - Manual (Page 12)

Installation
This sections details the installation of the JMP 9600, including:
• Mounting the Media Player
• Connections and Features
Mounting the Media Player
CAUTION: Installation and service must be performed by authorized personnel only.
Detailed mounting instructions can be found in the “ Mounting and Maintenance “
section. The 2U high, JMP 9600 can be placed on a tabletop or mounted on a rack shelf .
Use the included hardware for rack mounting.
Connections and Features
All system connections are on the back of the media player (figure 4).
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
1-2 3-4 5-6 7-8
DIGITAL VIDEO OUTPUTS DIGITAL
AUDIO
OUT
2 1
DVI-I-1 DVI-I-2
HDSDI
JMP 9600
9-10 11-12 13-14 15-16
1 LAN 2
REMOTE 1
GENLOCK
LOCK LTC
IN
OUT OUT
IN
REMOTE 2
NC C NC NC NO NC C C C NO NO NO
DIGITAL INPUTS RELAY OUTPUTS
1 2 3 4 + - + - + - + - 12V
POWER R1 R3 R4 R2
1a 4 1b 13
12 9 10 11
3 5 6 2b 2b
8 For Factory
Use only
7
Figure 4. Rear Panel Connections and Features
a Output DVI-I connectors (see page 7 )
h
Remote (RS-232) port 1 (see page 10 )
b Output HD-SDI connectors (see page 7 )
i
Digital Inputs 1 through 4 (see page 11 )
c Audio Output connectors (see page 7 )
j
Power port (see page 11 )
d Genlock Input connector (see page 8 )
k
Relay Outputs (see page 11 )
e Lock Input and Output connectors (see page 8 )
l
AC Power Input connectors (see page 12 )
f LTC Input and Output connectors (see page 8 )
m
AC Power Input switches (see page 12 )
g LAN ports — (see page 9 )
JMP 9600 Media Player • Installation 6