Extron Electronics JMP 9600 User Guide - Manual (Page 10)

Operational reliability — Dual redundant power supplies support round-the-clock
operation in mission-critical applications.
• Two AC power inputs — Support the media player through any power interruption
short of a simultaneous loss of power on both power sources.
• Two power input circuits — The two complete power circuits, from the plug, through
fuse, switch, and power supply, to the power insertion onto the power distribution
plane, are separate and independent from each other (see figure 3).
AC
Power
Power
Supply
Power
Supply
AC
Power
Figure 3. Redundant Power Supply Backs Up Primary
• Two power supplies — The two 100 VAC to 240 VAC, 50-60 Hz power supplies
provide worldwide power compatibility.
• Mutually redundant circuits — The power supply circuitry is configured to
automatically switch over. Should either power supply fail, the remaining, hot power
supply immediately assumes the load of the failed supply, meaning zero downtime and
no loss of functionality.
Remote control — Support for a wide range of remote control options using Ethernet
TCP/IP or serial RS-232 interfaces.
• Two LAN ports — Allow you to simultaneously remotely control the JMP 9600 while
you remotely upload new audio/video files to the player. Two levels of password
protection exist.
NOTE: Two LAN ports allow the media player to reside on two different subnets
simultaneously.
• RS-232 serial ports — Serial port Remote 1 allows remote control via a PC or a control
system.
NOTE: Serial port Remote 2 is for factory use only. The customer or end user
cannot control the player via the Remote 2 port.
1 TByte of internal media storage
Digital audio output — 16 channels of uncompressed digital audio; AES/EBU 24-bit at
48 kHz or 96 kHz
NOTE: 16 channel audio is supported with 4:4:4 video format only. 4:2:2 video formats
support 8 audio channel only.
JMP 9600 Media Player • Introduction 4