Ping function, Figure 23 – Extron Electronics JMP 9600 User Guide User Manual
Page 34
Ping function —
Use the Ping function to ‘ping’ another device on the network as follows:
1.
Rotate the encoder to highlight the
Ping IP
selection (see
a
on figure 23).
ENTER
3
4
1
5
ENTER
6
2
Figure 23.
Ping Function
2.
Press the Enter button (
b
).
3.
Rotate the encoder to highlight the first or next octet that needs to be changed (
c
).
4.
Press the Enter button.
5.
Rotate the encoder to change the selected octet to the desired value (
d
).
6.
Press the Enter button. The highlight jumps to the next octet.
7.
Repeat steps 3 through 6 as necessary to change all octets.
8.
Press the Enter button.
9.
Rotate the encoder as necessary to highlight the
Ping
control (
e
).
10.
Press the Enter button (
f
).
Player submenu
The Player submenu provides a tool to give the player a unique name and location
(see figure 24).
ENTER
3
4
1
5
2
PREV
Figure 24.
Player Submenu and Keyboard
Customize the player as follows:
1.
Rotate the encoder to highlight the identifier, either Name or Location (see
a
figure 24).
2.
Press the Enter button (
b
). An alphanumeric keyboard screen appears.
3.
Rotate the encoder to highlight the first or next character in the identifier (
c
).
NOTES:
•
is the back space key. Pressing Enter when this key is highlighted,
erases the character to the left of the cursor.
•
is the Caps key. Pressing Enter when this key is highlighted, toggles
the keyboard between uppercase and lowercase characters.
•
is the space key.
JMP 9600 Media Player • Operation
28