Switcher software, Control software for windows, Installing the software – Extron Electronics ISS 408 User Manual
Page 57
ISS 408 Integrated Seamless Switcher • Switcher Software
51
Switcher Software
This section describes:
•
•
Control Software for Windows®
The Windows-based Extron ISSISM Control Program communicates with the switcher via
the Ethernet LAN port or the rear panel Remote RS-232/RS-422 port to provide an easy
way to set up and operate the switcher. The program is compatible with Windows 2000
and Windows XP. Updates to these programs can be downloaded from the Extron Web site
(
www.extron.com
).
Installing the Software
The program is contained on the Extron Software Products DVD. Install the software as
follows:
1.
Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the DVD.
The Extron software DVD window appears (see figure 32).
Figure 32.
Software CD Window
2.
Click the
Software
tab (see figure 32, a).
3.
Scroll to the desired program and click Install (see figure 33).
Figure 33.
Software Installation