Extron Electronics ISS 408 - Manual (Page 24)

ISS 408 Integrated Seamless Switcher • Operation 18
Video & Audio Configuration menu
Figure 21 is a flowchart that shows an overview of the Video and Audio Configuration menu
and the available settings.
Input video type
• RGB • Betacam 60
• RGBcvS • HDTV
• YUVi • S-video
• YUVp • Composite
• Betacam 50
Input audio level
-24dB to +9dB
Input Configuration:
Select an input to configure
by pressing an Input button.
Rotate the knob to select
the video type. Rotate the knob to select
the audio level.
Default
Cycle
Menu
Menu
Next
10 sec. 10 sec.
Video & Audio
Configuration
Video/Audio Config
Input #1 Composite
Audio #3 Level -12db
Menu
Output
Configuration
Menu
Advanced
Configuration
Menu
User Presets
Menu
Next
Exit Menu
Press Next to Exit
1
1
Input Configuration:
If necessary, select
another input and
repeat.
2
Next
Menu
NOTE: The audio is broken
away in this example.
Figure 21. Video and Audio Configuration Menu Flowchart
Input Configuration submenu
Select an input to configure by pressing and releasing an input button. Rotate the Adjust
knob while in the Input Configuration submenu to select the correct video format (RGB,
RGBcvS, YUVi, YUVp, Betacam 50, Betacam 60, HDTV, S-video, or composite video) for
the selected input. Rotate the Adjust knob to select the audio gain or attenuation value,
from –24 dB to +9 dB. The defaults for each input are RGB video and a 0 dB audio level.