Extron Electronics ISS 408 - Manual (Page 33)

ISS 408 Integrated Seamless Switcher • Operation 27
Adjust an image for centering, sizing, brightness, contrast, color, tint, zoom, or detail as
follows (see figure 27).
10 sec.
timeout
2 sec. 2 sec.
Display
Cycle
Power
on
COLOR/
TINT
BRT/
CONT
SIZE CENTER FILTER
Extron Electronics
ISS 408 with DVI
Integration
Seamless Switcher
Extron Electronics
ISS 408 with DVI
60-423-01
Version x . xx
Preview
Color Tint
127 128
Press again for Prog
Preview
Brightness Contrast
063 063
Press again for Prog
Preview
Horz Size Vert
450 400
Press again for Prog
Preview
Horz Center Vert
500 550
Press again for Prog
Preview
Horz Filter Vert
3 7
Press again for Prog
10 sec.
timeout
COLOR/
TINT
BRT/
CONT
SIZE CENTER FILTER
Program
Color Tint
127 128
Press again for Prev
Program
Brightness Contrast
063 063
Press again for Prev
Program
Horz Size Vert
450 400
Press again for Prev
Program
Horz Center Vert
500 550
Press again for Prev
Program
Horz Filter Vert
3 7
Press again for Prev
NOTE: The Adjust knob and the Adjust knob are used to adjust the
image settings on the left and right sides of the LCD screen, respectively.
Figure 27. Picture Adjustments Flowchart
1. Press the desired input button to select the input to adjust.
NOTES:
• The adjustments are made to the input signal as it is switched to the output
(preview or program) shown in the LCD only. The adjustments do not affect
the same input switched to the other output.
• Color adjustments are available only for component video, S-video, and
composite video inputs.
• Tint adjustments are available only for S-video and composite video inputs.
2. Press the appropriate picture adjustment button: color and tint, brightness and contrast
(Brt/Cont), sizing (Size), centering (Center), or filter. The LCD display shows the name of
the adjustment and the current setting value.