Extron Electronics Matrix 12800 Series User Guide - Manual (Page 90)

5-7 Matrix 12800 Switchers • Web Operations
PRELIMINAR
Y
Email Settings page
The Email Settings page (figure 5-7) can be reached by clicking on the Email
Settings link on the system configuration page. The Email Settings page has
fields for entering all of the information needed to set up the e-mail notification
capabilities of the switcher. After editing any of the settings on this page, click the
Submit
button.
Refresh.
Select System
Configuration.
Figure 5-7 — Email Settings page
Mail IP Address field
The Mail IP Address field displays the IP address of the mail server that handles the
e-mail for the facility in which the Matrix 12800 is installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by
dots (periods). Each field can be numbered from 000 through 255. Leading zeroes,
up to 3 digits total per field, are optional. Values of 256 and above are invalid.
User Name field
The mail server User Name field displays the domain name of the Matrix 12800
e-mail server (such as folklore.net in the examples throughout this chapter).
Standard domain conventions (xxx.com) apply.
N The following characters are invalid or not recommended in a domain name:
{space} ~ = ‘ [ ] { } < > ’ “ ; : | \ and ?. The @ character is only
acceptable as the lead-in to the domain name (such as @folklore.net).
Password field
The mail server Password field and re-enter password field display and confirm
the password that the Matrix 12800 uses to log on to the e-mail server. Passwords
are case sensitive and are limited to 12 upper case and lower case alphanumeric
characters. Characters in these fields are masked by asterisks (*****).