Extron Electronics Matrix 12800 Series User Guide - Manual (Page 62)

3-29 Matrix 12800 Switchers • Virtualization/Control Software
PRELIMINAR
Y
Preferences menu
Immediate Changes — Causes changes to take effect
immediately.
Hold/Verify Changes — Delays implementation of changes
until the Changes – Take button is pressed.
Show all tie-lines — Causes the main screen to display all
ties at once, as shown in figure 3-2.
Show 1 input’s tie-lines — Because the Show all tie-lines
selection can be confusing, this selection removes all
of the tie lines from the main screen. The main screen
shows all of the ties for one input only when you rest
the mouse cursor over that input or one of its outputs.
Hide Virts ties w/Physical — Hides the virtual ties when you select the Edit Mode
Physical display.
Show Virts ties w/Physical — Shows the virtual ties when you select the Edit
Mode Physical display.
Frequency-read Options — Allows you to enable or disable periodic DSVP input
frequency reads.
Limit ties to same Video Type — Limits ties to the same video type (RGBHV,
component, and the like).
Icons in I/O Boxes — Displays icons, if assigned, in the virtual input and
virtual output boxes on the main screen.
Numbers in I/O Boxes — Displays virtual input numbers in the virtual
input boxes and virtual output numbers in the virtual output boxes.
Ties as Lines — Displays ties as lines (figure 3-19).
Figure 3-19 — Ties shown as lines