Extron Electronics Matrix 12800 Series User Guide - Manual (Page 82)

4-17 Matrix 12800 Switchers • Programming Guide
PRELIMINAR
Y
Command and response table for IP SIS commands
Symbol definitions
X4)
= Matrix name (Up to 240 characters)
N The following characters are invalid or not recommended in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ | and ?.
X4!
= Default name Factory default name (model name + last 3 pairs of MAC address)
X4@
= Time and date (set) In the format: MM/DD/YY•HH:MM:SS where:
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X4#
= Time and date (read) In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where
Day = weekday: Mon through Sun
DD = day: 01 through 31
Mmm = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X4$
= IP address ###-###-###-###
X4%
= Hardware (MAC) address ##-##-##-##-##-##
X4^
= Number of open connections 0 - 255
X4&
= Password 12 alphanumeric characters
N The following characters are invalid or not recommended in passwords: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ | and ?.
X4*
= E-mail user name The “from” name of the switcher (up to 240 alphanumeric characters)
N The following characters are invalid or not recommended in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : | \ and ?.
X4(
= E-mail account 1 through 9
X5)
= E-mail address Typical e-mail address format (for example: [email protected])
X5!
= Notify when? 0 = suspend 2 = fixed or restored
1 = fail or missing 3 = both (fail and fix)
X5@
= Notification desired 01 = fan 04 = input cards
02 = power supplies 05 = output cards
03 = controllers