Xylem SuSix Turbidity and Suspended Solids Transmitter - Manual (Page 99)

99 FW: 841013-005/843003-001
Turbidity and Suspended Solids Transmitter
EN 5.10 SuSix Manual 1406
Appendix B. MJK-Field Link Software
The MJK-Field Link software package provides several utilities that will be
described in detail on the following pages:
• PC <-> SuSix
® transmitter interconnection
• Saving log data
• Display firmware upgrade
• Converter firmware upgrade
• Language installation
Important Notes!
1. Current SuSix ® log data must be saved in a file before transferring and
installing new firmware. See "2. Save Log Data" overleaf.
2. Note down all display and converter settings before upgrading new
firmware.
3. The upgrade procedures below must be carried out in strict alphabeti-
cal order. First procedure A, then B, C, D and finally E.
A. Connect a PC to the SuSix ®
1. Insert the SuSix ® MJK-Field Link CD-ROM into the PC's disk drive.
The MJK-Field Link opening menu will appear after a short while (see
below). If the auto-run function does not execute, locate the
"MJK-Field-Link 840110-007.exe" file (or a similar file) and click "Run".