Xylem SuSix Turbidity and Suspended Solids Transmitter - Manual (Page 83)

83 FW: 841013-005/843003-001
Turbidity and Suspended Solids Transmitter
EN 5.10 SuSix Manual 1406
Factory settings
The "Factory settings" menu provides log deletion and resetting to factory
settings of the display unit.
Time format
24 hour
AM/PM
Back Select >
Language
(GB) English
(US) English
Dansk
Deutsch
Español
Français
Italiano
Nederlands
Norsk
Suomalainen
Svenska
Back Select OK
Cancel
Delete log
Restore default language
Restore factory setting
Back Select OK
Change device addresse
Device 1
Back Select OK
Add device
Change device addresse
Remove device
Change controller ID
Back Select OK
Scanning
Back
Display 841013-002
SW July 14 2007 14:14:03
Language 841513-000
Back
Set clock Language Modbus Factory settings Display SW version
Add device
Devices found
Device 1
Back Select OK
Change device addresse
Change device 1
Back Select OK
Remove device
Device 1
Back Select OK
Remove device
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select OK
Display Setup
Change controller ID
1
Back Select OK
Number of controllers
1
Back Select OK
Set clock
2007-08-18 10:53:12
Back Select >
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select OK
Display Setup
Change controller ID
Susix 1 1.2 g/L
Susix 2 212 mg/L
Back Select Display
Display Overview Menu
Display configuration
2 - Display Setup Page2
1. Press the up/down keys to highlight the required option and press OK.
Important:
The data logger will be reset, and all devices will be deleted from the
display Unit. This is indicated by the MJK start-up screen which is
displayed within a few seconds.
Display SW version
The "Display SW version" menu provides a read-out of the display soft-
ware (actually firmware) version, the build date and last-edited date of the
the multiple languages file.
Time format
24 hour
AM/PM
Back Select >
Language
(GB) English
(US) English
Dansk
Deutsch
Español
Français
Italiano
Nederlands
Norsk
Suomalainen
Svenska
Back Select OK
Cancel
Delete log
Restore default language
Restore factory setting
Back Select OK
Change device addresse
Device 1
Back Select OK
Add device
Change device addresse
Remove device
Change controller ID
Back Select OK
Scanning
Back
Display 841013-002
SW July 14 2007 14:14:03
Language 841513-000
Back
Set clock Language Modbus Factory settings Display SW version
Add device
Devices found
Device 1
Back Select OK
Change device addresse
Change device 1
Back Select OK
Remove device
Device 1
Back Select OK
Remove device
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select OK
Display Setup
Change controller ID
1
Back Select OK
Number of controllers
1
Back Select OK
Set clock
2007-08-18 10:53:12
Back Select >
Language
Set clock
Modbus
Factory settings
Display SW version
Back Select OK
Display Setup
Change controller ID
Susix 1 1.2 g/L
Susix 2 212 mg/L
Back Select Display
Display Overview Menu
Display configuration
2 - Display Setup Page2