Xylem SuSix Turbidity and Suspended Solids Transmitter - Manual (Page 49)

49 FW: 841013-005/843003-001
Turbidity and Suspended Solids Transmitter
EN 5.10 SuSix Manual 1406
Note: The units are defined later on in the "Converter setup/Units" menu
on page 60 .
Homogeneity
Displays the homogeneity of the measurement. The value informs
about the composition of the liquid, not the quality of the measure-
ment.
0% indicates full homogeneity.
100% indicates full non-homogeneity.
Solid curve
A liniarization curve can be selected depending on the application. It
only applies in suspended solids mode.
Clock
Time and date
The size of the display lines will automatically increase or decrease as the
number of display lines is removed or added to maximize the field of view
for the measured values