YSI P 700 IQ Analyzer - Manual (Page 80)

80 ba76133e01 09/2013
P 700 IQ
Tab. 5-5: Tubes of the T-SET (order no 821992B)
for photometer unit with plastic connectors
Maintenance interval 12 months
Preparations 1 Carry out the steps 1…11 in section 5.3.4 Maintenance and
cleaning work on the open P 700 IQ,  73.
2 Disconnect the plug from the P700IQ-PO4
(the heat tracing remains operating).
or
Switch off the analyzer with the power switch.
3 Screw off the empty photometer unit.
4 Carry out the mounting work on a lab table.
5 Remove the plastic cover from the photometer unit.
140 Cell (plastic connection) -
V8 C 1 nut
1 reinforced
120
+ Sample tube 400 mm -
sample 1 luer
400 V11 NC -
sample tube 120 mm
1 reinforced
1 luer
400 Green (reagent) VK5 NO -
reagent 1 reinforced
1 luer
400 Orange (calibration
standard) VK6 NO - calibration stan-
dard 1 reinforced
1 luer
400 Blue (cleaning) VK6 NC - cleaning solution 1 reinforced
1 luer
500 V8 NO - waste container 1 reinforced
Tube length
(mm)
Color coding Connection of Tube ends