YSI P 700 IQ Analyzer - Manual (Page 104)

104 ba76133e01 09/2013
P 700 IQ
7.4 Electrical data
7.5 Consumption data
The consumption of chemicals depends on the specified intervals and
on the selected measuring range.
Typical consumption
values
Input voltage Depending on the selected variant:
115 V AC, 60 Hz
Fuse protection of the
building 16 A with ground fault circuit inter-
rupter
Power consumption 35 - 1100 W depending on the option
• Basic consumption 35 W
• Filtration pump 40 W
• Climate kit 200 W
• Heat tracing of the
intake tube
20 W/m (max. 20 m allowed)
• Heat tracing of the
return tube
20 W/m (max. 20 m allowed)
Power supply Nominal voltage:
115 V AC ± 10 % / 60 Hz
Power supply:
3-pin, N/L /PE
Cable cross-section of power supply:
Europe: 1.5 ... 4.0 mm
2
USA: AWG 14 ... 12
Fuse protection on the operator side:
16 A maximum
Solution Sufficient for
Reagent solution RE 2.5 4 months (measuring range A, mea-
suring interval 5 minutes)
4 months (measuring range B, mea-
suring interval 10 minutes)
Cleaning solution CL 1.0 4 months (daily cleaning)
Standard solution ST 4 months (daily calibration)