Asus AP140R-E1 - Manual (Page 96)

Chapter 6: Driver installation 6-4
The Array Configuration Utility menu lets you create and manage
RAID sets. The Disk Utilities allows you to check and verify SATA
hard disk drives.
At the bottom of the screen is the legend box. The keys on the legend
box allow you to navigate through the setup menu options or execute
commands. The keys on the legend box vary according to the menu
level.
6.1.4.1 6.1.4.1 6.1.4.1 6.1.4.1 6.1.4.1 Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped)
To create a RAID 0 set:
1. From the Adaptec RAID Configuration Utility initial menu, highlight
Array Configuration Utility, then press .
2. From the Main Menu, select Create Array, then press .
3. Use the arrow keys to highlight an option.