Asus AP140R-E1 - Manual (Page 88)

5-32 Chapter 5: BIOS setup
5.6.4 Boot Settings Configuration
Boot Other Device [Enabled]
Quick Power On Self Test [Enabled]
Halt On [All, But Diskette]
Case Open Warning [Enabled]
Boot Up Floppy Seek [Enabled]
Boot Up NumLock Status [On]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Boot Settings Configuration
Item Specific Help
Select your Boot
Device Priority.
Select Menu
Boot Other Device [Enabled]
Allows you to enable or disable selection of other boot device.
Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping
retesting a second, third, and fourth time. Configuration options: [Disabled]
[Enabled]
Halt On [All, But diskette]
Sets the system to halt on errors according to the system functions
specified in each option. Configuration options: [All Errors] [No Errors] [All,
But Keyboard] [All , But Diskette] [All, But Disk/Key]
Case Open Warning [Disabled]
Allows you to enable or disable the case open status feature. Setting to
[Enabled] clear the case open status. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine
whether the drive has 40 or 80 tracks. Configuration options: [Disabled]
[Enabled]