SENA SS800 - Manual (Page 91)

91
 ReasmFails :
Specifies the number of datagrams that cannot be reassembled.
 FragOKs :
Specifies the number of datagrams that were fragmented successfully.
 FragFails :
Specifies the number of datagrams that need to be fragmented but couldn't be because the IP header
specifies no fragmentation. For example, if the datagrams "Don't Fragment" flag was set, the datagram
would not be fragmented. These datagrams are discarded.
 FragCreates :
Specifies the number of fragments created.
Figure 7-3 IP statistics
7.4. ICMP Statistics
The ICMP Statistics screen provides statistical information about packets/connections using an ICMP
protocol. Definitions and descriptions of each parameter are described below:
 InMsgs, OutMsgs :
Specifies the number of messages received or sent.