Dynamic dns configuration – SENA SS800 User Manual
Page 31
31
Figure 3-3 Browsing MIB-II OIDs of Super Series SNMP agent using SNMP Browser
(AdventNet MibBrowser)
3.3. Dynamic DNS Configuration
When users connect the Super Series to a DSL line or use a DHCP configuration, the IP address
might be changed whenever it reconnects to the network. It can therefore be very difficult to post all
related contacts for each new IP address. In addition, if the administrator only has access through the
remote console, there is no way to know if an IP address has changed, or what the new IP address is.
A Dynamic DNS service is provided by various ISPs or organizations to deal with the above issue. By
using the Dynamic DNS service, users can access the Super Series through the hostname registered
in the Dynamic DNS Server regardless of any IP address change.
By default, the Super Series only supports Dynamic DNS service offered at Dynamic DNS Network
Services, LLC (
www.dyndns.org
). Contact Sena technical support for issues regarding other Dynamic
DNS service providers.
To use the Dynamic DNS service provided by Dynamic DNS Network Services, the user must set up
an account in their Members' NIC (Network Information Center -
http://members.dyndns.org
). The user