SENA SS800 - Manual (Page 23)

23
2) The user must log into the Super Series. Type the user name and password. A factory
default setting of the user name and password are both root for the system root and admin
for the system administrator.
3) Upon authentication by the Super Series, the CLI prompts or text menu screens are shown.
2.3. Accessing The Web Browser Management Interface
The Super Series supports both HTTP and HTTPS (HTTP over SSL) protocols. The Super Series also
provides has its own Web management pages. To access the Super Series Web management page,
enter the IP address or resolvable hostname of the Super Series into the web browser’s URL/Location
field. This will direct the user to the Super Series login screen. The user must authenticate themselves
by logging into they system with a correct user name and password. The factory default settings are:
Login: root Password: root
Login: admin Password: admin
Note: Before accessing the Super Series Web management page, the user must check the IP
address (or resolvable Hostname) of the Super Series and Subnet mask settings.
Figure 2-17 Login screen of the Super Series web management
Figure 2-17 shows Login screen of the Super Series web management. On this screen, user can
select initial page where he want to move to after login. If user selects Configuration page, he can see
the configuration homepage of the Super Series Web management interface shown on Figure 2-18. If
user select Customer page, he can see the default Customer homepage of the Super Series Web
management interface or his own homepage. For more detail information about user customization of
Web UI, please refer to 9. User Customization Guide section.
Figure 2-18 shows the configuration homepage of the Super Series Web management interface. A
menu bar is provided on the left side of the screen. The menu bar includes the uppermost
configuration menu groups. Selecting an item on the menu bar opens a tree view of all the submenus
available under each grouping. Selecting a submenu item will allow the user to modify parameter
settings for that item. Every page will allow the user to [Save to flash], [Save & apply] or [Cancel] their
actions. After changing the configuration parameter values, the users must select [Save to flash] to