SENA SS800 - Manual (Page 29)

29
Figure 3-2 SNMP Configuration
3.2.1. MIB-II System Objects Configuration
MIB–II System objects configuration sets the System Contact, Name, Location, and Authentication-
failure traps used by the SNMP agent of the Super Series. These settings provide the values used for
the MIB-II sysName, sysContact, sysLocation, sysService and enableAuthenTrap.
Brief descriptions of each object are as follows,
 sysContact:
Identification of the contact person for the managed system (Super Series), and a description of how
to contact the person.
 sysName:
Name used to identify the system. By convention, this is the fully qualified domain name of the node.
 sysLocation:
The physical location of the system (e.g., Room 384, Operations Lab, etc.).