SENA SS800 - Manual (Page 67)

67
Series and the serial device and the status of the TCP connection between the Super Series and
remote hosts could be monitored and managed in the same way of the port keywords as well.
Each reaction can be configured individually upon each event. Reaction can be an email delivery,
SNMP trap sending, command sending or either combination of all reactions.
 Port event handling
If the user wants to enable port event handling feature, set Port event handling as enable. This is a
global parameter so if this feature is disabled, the Super Series does not take any actions on port
events.
 Notification interval
To prevent Super Series from being trapped in handling port event, there is a Notification interval
parameter. Super Series will send notification email or SNMP trap every Notification interval even it
detect predefined keyword within Notification interval. The smaller value of this parameter will result in
immediate response for predefined keyword and heavy usage of system resources. The largest value
accepted by user is recommended to prevent system resource usage minimization.
 Email notification
This parameter enables or disables Email notification feature of Super Series. When Super Series
sends Email notification, it used SMTP server configured in SMTP server configuration. If the SMTP
server is not configured correctly or disabled, Email feature gets disabled also. For details of SMTP
server configurations and descriptions, please refer to section 3.4 SMTP Configuration.
 Title of Email
This parameter set Title of Email that will be sent by Super Series when pre-defined keyword is
detected.
 Recipient's Email address
This parameter set mail recipient who will receive notification mail when pre-defined keyword is
detected.
 SNMP notification
This parameter enables or disables SNMP notification feature of Super Series.
 Title of SNMP trap
This parameter set Title of SNMP trap that will be sent by Super Series when pre-defined keyword is
detected.