SENA SS800 - Manual (Page 71)

71
 Port enable/disable
This parameter enables or disables port function.
 Port title
If this parameter is set with a certain string, the port title of each serial port will be set with a
combination of this string and the port number. For example, if the port title is set with “my server”,
the port title of port 1 will be set with “my server #1”, the port title of port#2 will be “my server #2”, and
so on.
 Host mode
If the host mode is set to TCP or UDP mode, the listening port number of each serial port will be set
with the following equation:
(listening port number + serial port number - 1)
Other parameters of each serial port will be set as the same value set in as “all port configuration”.
 Remote host configuration, Port IP filtering, Cryptography configuration, Filter application,
Serial port parameters, Modem configuration, Port logging, Port event handling
For the parameters of the groups above, the values set in an “all port configuration” will be set
identically for all of the serial ports.