SENA SS800 User Manual
Page 124
124
Network Adapter Card
[Ethernet]
Ethernet chip test--------------------------------------------[SUCCESS]
PING 192.168.0.135 from 192.168.161.5 : 64 bytes of ethernet packet.
64 bytes from 192.168.0.135 : seq=0 ttl=255 timestamp=11172879 (ms)
64 bytes from 192.168.0.135 : seq=1 ttl=255 timestamp=11173874 (ms)
64 bytes from 192.168.0.135 : seq=2 ttl=255 timestamp=11174875 (ms)
64 bytes from 192.168.0.135 : seq=3 ttl=255 timestamp=11175876 (ms)
*******
Hardware auto-detect and auto-test
SUMMARY *******
1. DRAM Test
-----------------------------------------------[SUCCESS]
2. FLASH Test -----------------------------------------------[SUCCESS]
3. FAN Test
-----------------------------------------------[SUCCESS]
4. EEPROM Test-----------------------------------------------[SUCCESS]
5. UART Test Summary
Port NO |
exist status
|
exist status
|
exist status
| exist
status
-----------------------------------------------------------------------------
--
Port 01-04|
YES
SUCCESS
|
YES
SUCCESS
|
YES
SUCCESS
|
YES
SUCCESS
Port 05-08|
YES
SUCCESS
|
YES
SUCCESS
|
YES
SUCCESS
|
YES
SUCCESS
6.PC CARD Test Summary
5V CARD
5.0V card found: Lucent Technologies WaveLAN/IEEE Version 01.01
Network Adapter Card
7. PING Test
-----------------------------------------------[SUCCESS]
PRESS any key to continue!!
Figure A-13 Hardware test screen within Bootloader Menu Program
For each hardware component test, the user can skip a test by pressing the
-------------------------------------------------------------------------------
Hardware Test
-------------------------------------------------------------------------------
Select menu
0. Test Mode - One time
1. Auto test
2. DRAM test
3. FLASH test
4. LED test
5. EEPROM test
6. UART test
7. PC card test
8. Ethernet test
-----> 1
*******
Hardware auto-detect and auto-test *******
[DRAM]
DRAM Test in progress ----------------------------------------[
640KB]
DRAM Test ----------------------------------------------------[SKIPPED]
[FLASH]
Flash Test Status---------------------------------------------[
2 %]
FLASH Test ---------------------------------------------------[SKIPPED]
Figure A-14 Skip the specific test using ESC key
If a failure occurs while Auto Test with looping mode is being performed, the test will stop and the