SENA SS800 - Manual (Page 40)

40
Table 4-1 Serial port configuration parameters
Port Enable/Disable
Port title
Apply all port settings (Individual serial port setting only)
TCP listening port
Telnet protocol
Max allowed connection
Cyclic connection
TCP
Inactivity timeout (0 for unlimited)
UDP listening port
Max allowed connection
Accept UDP datagram from unlisted remote
host or not
Send to recent unlisted remote host or not
UDP
Inactivity timeout (0 for unlimited)
Host mode
Modem emulation
Add or Edit a remote host
2
Primary host address
Primary host port
Secondary host address
Secondary host port
Remote host
1
Remove a remote host
Allowed host IP
Port IP filtering 3
Subnet mask to be applied
Encryption method
None/SSLv2/SSLv3/SSLv3 rollback to v2/
TLSv1/3DES/RC4
Cipher suite selection
Verify client (server mode only)
Verify certificate chain depth Cryptography 4
Check the certificate CN
Filter application path
Filter application
Filter application arguments
Type
Baud rate
Data bits
Parity
Stop bits
Flow control
DTR behavior
DSR behavior
Serial Port
Parameters
Inter-character timeout (ms)
Enable/Disable modem
Modem init-string
Modem
DCD behavior
Enable/Disable Port logging
Port log storage location
Port log buffer size
Port logging
Display port log
All serial
ports
setting
Or
Individual
serial port
setting
#1~#8(1/4)
Port event handling Enable/Disable port event handling
1
TCP/UDP mode only.
2
A secondary remote host is available for connection-fail backup in TCP mode
3
TCP/UDP mode only.
4
TCP mode only