B&B Electronics 856-14205--29 - Manual - Manual (Page 62)

Appendix A: iView
2
Management Software
57
For the first-time configuration, the user must first create an MD, then an MA,
then local and peer MEPs can be added. To create an MD, select the "Configure
MD' button to display the OAM CFM Maintenance Domain Configuration page as
shown below:
OAM CFM: Maintenance Domain Configuration screen.
NOTE: iView 2 will automatically display this page if there
is no MD yet defined when the user attempts to access
any other menu control.
Enter the MD name and select the level for the domain. To cancel the MD, select
Delete. To store the MD, press Save and the screen is refreshed.