B&B Electronics 856-14205--29 - Manual - Manual (Page 44)

Operation
39
SMALL FORM-FACTOR PLUGGABLE PORTS (SFP)
iMcV-Giga-FiberLinX-III modules are available with one optional SFP port. The
SFP port can support a 100Mbps or 1000Mbps fiber SFP. It can also support a
1000Mbps or 10/100/1000Mbps copper SFP. SFPs must be MSA-compliant, with
or without Digital Diagnostics Monitoring Interface (DDMI). The SFP port will
accept third-party SFPs. DDMI statistics provide real-time access to transceiver
operating parameters such as voltage, temperature, laser bias current, and both
transmitted and received optical power. DDMI information can be accessed in
iView
2 by clicking Tables > SFP Info.
Note: iMcV-Giga-FiberLinX-III has been tested
with the B&B Electronics SFP modules. You can
install any MSA-compliant SFP module. However,
B&B Electronics does not guarantee the
functionality of non- B&B Electronics SFP modules
due to possible non-conformity with MSA design
standards.