B&B Electronics 856-14205--29 - Manual - Manual (Page 18)

Configuration
13
SAVED AND CURRENT VALUES
Saved values display the changes made during the current session and current
values display the values currently in use:
 IP Address (IP address of SNMP agent)
 Subnet Mask (mask to define IP subnet to which agent is
connected)
 Default Gateway (default router for IP traffic outside of the subnet)
 DHCP
 Community Strings
COMMAND LIST
I = Enter new Saved Parameter Values
P = Change the Password*
T = Enter new Trap Destinations
K = Remove All Trap Destinations
C = Create SNMP Community Strings
U = Delete All SNMP Community Strings
E = End the session*
Reboot = Reboot the unit (may result in short data loss)
D = Enable or disable DHCP
Space Bar = Opens the device specific configuration options screen.
*The screens illustrated in this manual show capabilities for users with Admin
rights. Individuals with User-level rights can only view port status and port
settings, change their password, end a session, and reboot the unit.
Note: It is necessary to reboot the iMcV-Giga-FiberLinX-
III after making any modifications to the Saved Values for
the changes to take effect. To reboot, type Reboot at the
prompt on the Main Configuration screen.