B&B Electronics 856-14205--29 - Manual - Manual (Page 3)

i
 2013 B&B Electronics. No part of this publication may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including
photography, recording, or any information storage and retrieval system without
written consent. Information in this manual is subject to change without notice,
and does not represent a commitment on the part of B&B Electronics.
B&B Electronics shall not be liable for incidental or consequential damages
resulting from the furnishing, performance, or use of this manual.
All brand names used in this manual are the registered trademarks of their
respective owners. The use of trademarks or other designations in this
publication is for reference purposes only and does not constitute an
endorsement by the trademark holder.
CAUTION
This is an Electrostatic Sensitive Device. Use ESD precautions for safe
handling.
Before removing the card from the anti-static protective packaging:
• Discharge any static electricity buildup on your body by touching a large
grounded metal surface or the metal chassis on equipment connected to
earth ground by a 3-wire power cord. Use of a grounding wrist strap is
recommended.
• Avoid touching the gold connectors or other parts on the card except when
necessary to set the configuration DIP switches.
• Remove AC power from the computer before inserting the card