B&B Electronics 856-14205--29 - Manual - Manual (Page 24)

Configuration
19
Once loaded into the device's SNMP memory area, the system prompts the user to reboot
the device to make the new configuration active.
ACCOUNTS
The following are the three levels for CLI or Telnet account access:
User View status, change own password, and reboot.
Operator All User privileges mentioned above, plus ability to change settings.
Administrator Operator privileges mentioned above, plus ability to
add/delete accounts and reinitialize the unit to default
settings (cleandb).
OPERATIONAL MODE CONFIGURATION
There are three modes of operation that can be configured through the Serial/Telnet
session: Mode 1, which supports a mixture of tagged and untagged traffic, Mode 2, Extra
tagging and Mode 3, VLAN Filter.
OPERATION MODE 1 – MIXED TAGGED AND
UNTAGGED FRAMES
In this mode, all tagged and untagged frames pass on any given port. Management to
the device can be tagged or untagged.