VEGA VEGAPULS 81 - Manual (Page 68)

68 VEGAPULS 64 and 81
Set-up: Adjustment with signal conditioning instrument
Menu structure of the signal conditioning instruments VEGAMET 514 V and 515 V
Measured value indication
The stage of the measured value indication is the upper menu stage. Here you can scroll with the
keys “ → “ and “ ← “ between the following indications:
- Indication MST1; measured value of sensor 1
- Indication MST2; measured value of sensor 2
- Indication MST3; measured value externally or value of the differential measurement
- Indication MST1-2; measured value sensor 1 and sensor 2
Fault signals are displayed from the indication via the appropriate indication.
Main menu
You can enquire up to five menus in the main menu stage.
With the keys “ → “ and “ ← “ you scroll to the five main menus:
- Configuration
- Additional functions
- Parameter adjustment MST1
- Parameter adjustment MST2
- Parameter adjustment MST3
The menu “Parameter adjustment“ can be enquired when the measurement loop is created and
configured in the configuration menu.
ESC
OK
OK
OK
OK
ESC
ESC
TAG1
%
36.9
TAG2
%
TAG3
%
Menu point
Parameter
Value
Add.
func-
tion Con-
figura-
tion Param.
TAG3 Param.
TAG2 Param.
TAG1
Pass-
word
off Out-
puts Meas-
uring
loop Inputs Simu-
lation Output Process-
ing Adjust-
ment
Scaling Lin.
curve
Integra-
tion
time
10
Measuring
value indica-
tion
Main
menu
Submenu
1
Menu choice within the menu
stage as well as selection of fixed
parameters
Submenu
2
MST1-2