VEGA VEGAPULS 81 - Manual (Page 12)

12 VEGAPULS 64 and 81
Measuring system with one or two VEGAPULS 64 sensors on the
VEGAMET 514 V or 515 V signal conditioning instrument
• Digital output signal; signal processing in the signal conditioning instrument.
• Up to two sensors on one two-wire line. The two-wire line transmits the power supply, the dig-
ital output signal as well as the static adjustment signal of the sensors.
• Adjustment and parameter adjustment via a PC and the adjustment program VVO. The PC is
connected via the adapter VEGACONNECT to the sensor, the signal line or to the signal condi-
tioning instrument. In addition adjustment and parameter adjustment is possible with the signal
conditioning instrument.
• Optionally an external digital/analogue indication. The indication can be separated from the
sensor up to 25 m.
• The permissible max. resistor of the two-wire signal and supply line is 15 Ω per wire or max.
1000 m cable length between sensor and signal conditioning instrument.
2
2
VEGAMET
514V
2
VEGAMET 515V
Signal conditioning
instrument VEGAMET
514 V in housing type
505
VEGACONNECT
PC with adjustment software
VEGA Visual Operating
VEGAPULS 64
with digital
signal output
VEGAPULS 64
with digital signal
output
VEGACONNECT
PC with adjustment software
VEGA Visual Operating
Signal conditioning
instrument
VEGAMET 515 V in
housing type 505
Screened cable for strong electromag-
netic interferences
Current outputs
Voltage outputs
Relay outputs
Fail safe relay
Digital connectability
Outputs (see also Product Informa-
tion “signal conditioning instru-
ments series 500“)
Current outputs
Voltage outputs
Relay outputs
Fail safe relay
Digital connectability
Outputs (see also Product Informa-
tion “signal conditioning instruments
series 500“)
Screened cable for strong electromag-
netic interferences
Types and versions: Configuration of measuring systems