VTech SN6197_-2 Manual - Manual (Page 78)

71
Multiple handset use
Transfer a call during an intercom call
To transfer a call at the telephone base:
Press MENU, then press or to scroll to
Intercom, then press SELECT .
If you have only one handset/pendant,
the telephone base shows
Calling HANDSET 1/Calling all
pendants. The handset/pendant rings.
The handset shows BASE 0 is calling.
If you have two or more handsets/
pendants, your telephone base shows
INTERCOM TO: Press or to scroll to
the desired device and then press SELECT.
You may also enter a destination handset
number (
1-9), or enter followed
by 0-2 for HANDSET 10 to HANDSET 12, or
followed by # for all devices.
The destination device rings.
The destination handset shows
BASE 0 is calling.
The telephone base shows Calling
HANDSET X/Calling all pendants/
Calling all devices.
To answer the intercom call on the destination handset, press ,
or any dialing key ( 0-9 or ). Both devices now show Intercom.
-OR-
To answer the intercom call on the pendant, press .
1.
•
•
2.
9:48am 5/20
INTERCOM TO:
HANDSET 1
HANDSET 2
BACK SELECT
9:48am 5/20
Answering system
Intercom
Photo speed dial
BACK SELECT
BASE 0
is calling
9:48 AM 5/20
9:48am 5/20
Intercom