VTech SN6197_-2 Manual - Manual (Page 52)

45
Telephone settings
Home area code
If you dial your local calls using only seven
digits (area code not required), you can
program your home area code so that when
you receive a call within your local area, the
telephone number is automatically stored
without the area code in the caller ID log.
Press MENU when the handset/base is not
in use.
Press or to scroll to
Settings, then
press SELECT on the cordless handset/
SELECT on the telephone base.
Press or to scroll to Home area code,
then press SELECT on the cordless
handset/ SELECT on the telephone base.
The screen displays Only for 7-digit dial
from CID.
Use the dialing keys (
0-9) to enter a three-digit home area code, then
press SELECT on the cordless handset/ SAVE on the telephone base.
You hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial
the area code when making a local call, or, if you move to a location
that requires it, follow the steps above to delete the home area code
you have already programmed. After you have deleted the home area
code, _ _ _ will appear on the screen.
1.
2.
3.
4.
9:48am 5/20
SETTINGS
CID time sync
Home area code
BACK SELECT
9:48am 5/20
Pendant
Annc Caller ID
Settings
BACK SELECT
9:48am 5/20
HOME AREA CODE
_ _ _
BACKSPACE SAVE