VTech SN6197_-2 Manual - Manual (Page 15)

Getting started
8
Pendant battery charging
The pendant status light indicates the battery status (see the table
below). If necessary, place the pendant in the pendant charger to
charge the battery. For best performance, keep the pendant in the
pendant charger when not in use. The battery is fully charged after
3 hours of continuous charging.
If the pendant status light flashes red and you hear
“Low battery”, you
need to charge the pendant without interruption to give it enough charge
to use for a short time. When the battery is low, the pendant status light
flashes red. If you are on a call in low battery mode, the pendant plays
short beeps to alert you.
The following table summarizes the battery charge indicators and
actions to take.
Battery indicators Battery status Action
The pendant status light flashes
red. You hear “Low battery” when
there is only 30 minutes talk time
left. You hear an alert tone every
one minute.
The battery has
very little charge.
Charge without
interruption.
The pendant status light is solid
red.
The battery has
enough charge to
be used for a short
time.
Charge without
interruption.