VTech SN6197_-2 Manual - Manual (Page 113)

106
Answering system settings
Remote access code
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19. You
can set the code from 00 to 99.
To set remote access code with a cordless handset:
Press MENU when the handset is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Ans sys setup, then
press SELECT.
Press or to scroll to Remote code, then
press SELECT.
Press or to move the cursor to the left
or right. Use the dialing keys ( 0-9) to enter a
two-digit number.
Press
SELECT. You hear a confirmation tone.
To set remote access code with the telephone base:
Press MENU when the telephone base is not in use, then press SELECT
to select Answering system.
Press or to scroll to Ans sys setup, then press SELECT .
Press or to scroll to Remote code, then press SELECT .
Press or to move the cursor to the left or right. Use the dialing
keys ( 0-9) to enter a two-digit number.
Press SAVE . You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
# of rings
>Remote code
REMOTE CODE
19