Velleman VMB1LED - Manual (Page 4)

VMB1LED PWM LED strip dimmer Manual– edition 1_rev.2
4
Led indications:
• to show the dim position (0...100%)
• to indicate the activated mode:
o
continue on: desired dim position reached
o
slow flash: the timer is running
o
fast flash: the dim position is changing
o
very fast flash: the module is in learning mode to assign pushbuttons
o
2x short flash: a communication error occurred
• when power is supplied
• to send the status of the de dimmer to the control modules
• when receiving or transmitting data over the Velbus
Configuration:
• 247 possible addresses (selectable via the ‘ADDR’ rotary switches)
• storage capacity for 12 different pushbuttons per control function
• configurable via the Velbus pc interface (VMB1USB, VMB1RS of VMBRSUSB) en the Velbus link software
• also configurable without using a PC by operating the desired pushbuttons in learning mode
• learned pushbuttons are memorized during power cuts
Power supply module:
• required power supply: 10...30VDC
• consumption in standby: 25mA @ 30VDC (20mA 2 16VDC)
• maximum consumption: 60mA @ 30VDC
Dimensions:
• standard DIN-rail housing: 2 modules wide
• length x depth x height: 90 x 36 x 58mm